WD165*砂輪修整器適用於平面磨床、*工具磨床上， 修整由直線和圓弧組成的各種截形砂輪。

Mode WD165 Universal Wheel Dresser Adaptable on surface grinder and universal tool grinder for dressing grinding wheels into various cross sections of flat or curved shapes.

主要參數：

中心高----------------------------------165mm

測量準銷直徑---------------------------Φ10mm

金鋼刀擺動的zui大距離-------------------±20mm

修整砂輪zui大直徑----------------------Φ200mm

轉盤刻度讀數精度------------------------5’

進給zui大移動量-------------------------20mm

推給手柄刻度每格----------------------0.02mm

計算公式

修整凸圓弧：H=L+R

修整凹圓?。篐=L-R

H-兩準銷外母線間的距離

R-所需修整圓弧之半徑

L-金鋼刀刀尖至基準板的距離

Main Parameters：

Center height-------------------------------------------------165mm

Measuring quasi-pin dia-------------------------Φ10mm

Max.swing distance

of diamond cutter----------------------------------±20mm

Max.wheel diameter--------------------------------------------Φ200mm

Reading accuracy of turret index1-------------5’

Max.translation of fee-----------------------------20mm

Feed per division of handle scale-------------0.02mm

Calaculation formulars

To dress convex arc surface:H=L+R

To dress concave arc surface:H=L-R

H: distance between outer generating lines of two locating pins.

R: Radius of the arc surface to be dressed

L: distance from tip of diaamond cutter to base plate