機床商務網
詳細介紹
| Description | TKV-760H | TKV-760HT | TKV-760HM | TKV-760HMT |
| Capacity | ||||
| Max. swing dia. | 800 mm (850 mm, V-type turret only) | |||
| Max. turning dia. | 760 mm | 700 mm | ||
| Std. turning dia. | 630 mm (760 mm, V-type turret only) | 700 mm | ||
| Max. turning height | 750 mm (620 mm, V-type turret only) | 650 mm | ||
| Spindle | ||||
| Hydraulic chuck | 457 mm (18”) | |||
| Range of table speed | 25-2000 rpm | |||
| Front bearing dia. | 160 mm | |||
| Spindle nose | A2-11 | |||
| Turret | ||||
| Turret type | H12 (OPT V4 / V6 / V8) | H12+H12 | H12 | H12+H12 |
| Number of tool position | 12 (OPT 4 / 6 / 8) | 12+12 | 12 | 12+12 |
| Tool Size | Ø 25, Ø 32, Ø 40, Ø 50 mm | Ø 25, Ø 40, Ø 50 mm | ||
| Feed | ||||
| Rapid rate (X-axis) | 20 M/min | |||
| Rapid rate (Z-axis) | 20 M/min | |||
| Horizontal travel (X-axis) | 385 mm (-50 + 550 mm, V-type turret only) | |||
| Horizontal travel (Z-axis) | 760 mm (700 mm, V-type turret only) | |||
| Cutting federate | 0.001-500 mm/min | |||
| Feed override | 0 - 150 % | |||
*The Specifications are subject to change without prior notice.
H12 Turret with milling (Turning)
H12 Turret
H12 Turret (Drilling)
Air condition for electrical cabinet
Special chuck (Options)
TKV-460H/HT/HM/HMT
V6 Turret
V4 Turret
Options
Second control box
Coolant system (3 bar and more)
High and low pressure of hydraulic chuck
Tool presetter
Oil mist collector
External counter for each insert
Oil skimmer (Disk type)
Finger hydraulic chuck
Simultaneous double tooling device
High torque main spindle motor with built-in dual speed gearbox
Table-speed and torque
Dimensions
Unit: mm
| A | B | C | D | E | F | G | H | |
| TKV-460H | 990 | 2855 | 1620 | 457 | 2780 | 1140 | 3430 | 650 |
| TKV-760H | 1080 | 3440 | 1950 | 505 | 2980 | 1200 | 3670 | 710 |
| TKV-860H | 1200 | 3900 | 2100 | 655 | 3288 | 1200 | 3870 | 860 |
| TKV-1100H | 1250 | 4042 | 2710 | 755 | 3700 | 1250 | 4230 | 1030 |
| TKV-460HM | 990 | 2815 | 1620 | 457 | 2780 | 1140 | 3430 | 650 |
| TKV-760HM | 1080 | 3450 | 1950 | 505 | 2980 | 1200 | 3670 | 710 |
| TKV-860HM | 1200 | 3872 | 2100 | 655 | 3288 | 1200 | 3870 | 860 |
(Option: V4 / V6 / V8)
| A | B | C | D | E | F | G | H | |
| TKV-460H | 980 | 2950 | 2220 | 400 | 2670 | 975 | 3435 | 630 |
| TKV-760H | 1175 | 3680 | 2070 | 575 | 3180 | 1015 | 3855 | 845 |
| TKV-860H | 1175 | 4000 | 2070 | 575 | 3180 | 1015 | 3855 | 845 |
| TKV-1100H | 1250 | 4042 | 2710 | 755 | 3700 | 1250 | 4230 | 1030 |
Standard Tooling System (H12 Turret)
Unit: mm
Standard Tooling System (H12 Turret With Milling)
Unit: mm
Electrical Cabinet
Easy maintenance circuit arrangement.
Suitable all kinds of environment.
CE standard available.
CNC Controller
Fanuc 0i-T
Siemens 840D
Work Range: H12 Turret (Unit: mm)
TKV-460H
TKV-760H
TKV-860H
TKV-1100H
Tool Interference: (Unit: mm)
Standard Accessories
- Spindle orientation
- Manual 4-jaw chuck (for TKV-1100H)
- Hydraulic 3-jaw solid chuck & cylinder, size as spec (except TKV-1100H)
- Hydraulic power unit
- Soft jaw x 1 set for hydraulic chuck (except TKV-1100H)
- Foot switch for hydraulic chuck (except TKV-1100H)
- Automatic lubrication system
- Coolant through turret
- Coolant flushing system with tank
- Heat exchanger for electrical cabinet
- Splash guard
- Work light
- Warning light (R / Y / G)
- Workpiece counter (CNC Controller)
- Chain type chip converor & chip trolley
- Manual for operation & maintenance
- Manual for electrical & hydraulic circuit diagram
- Electronic manual for controller
- Tool box with tool kits
- Leveling bolts & pads
Options
- Higher power motor, αil 50 (45/55kw), αil 30 (30/37kw), αil 40(37/45kw)
- Extra hydraulic chuck & cylinder (for TKV-1100)
- Dual speed gear box for main spindle
- High & low pressure chucking
- Chuck position sensor
- Hard jaw of chuck
- Manual guide i
- Oil mist collector
- Auto door (Automatic opening & closing of main door)
- Special tool holder
- High pressure coolant through turret
- Tool presetter
- Turning tools
- External counter display for each insert
- Air condition for electrical cabinet
- Oil skimmer (Disk type)
- Scrap type chip conveyor with chip trolley
- Jig & fixture
- Turnkey project
- Power transtormer
- CE mark
機床商務網