機床商務網
詳細介紹
| Description | TK 1800N | TK 2000N | TK 2500N |
| Capacity | |||
| Swing over bed | 1775 mm (69.88") | 1975 mm (77.75") | 2500 mm (98.42") |
| Swing over cross slide (Full length) | 1350 mm (53.14") | 1550 mm (61.02") | 2050 mm (80.7") |
| Swing over cross slide (Half length) | 1530 mm (60.23") | 1720 mm (67.71") | 2200 mm (86.61") |
| Center height | 900 mm (35.43") | 1000 mm (39.37") | 1250 mm (49.21") |
| Between centers | 3000-12000 mm (120"-480") | ||
| Bed width / Auxiliary guide | 1345 mm (52.95") / 1550 mm (61.02") | ||
| Headstock | |||
| Spindle bore,dia. | Dia. 210 mm (8.2") | ||
| Spindle nose | A2-15 | ||
| Spindle speed (rpm), steps | 6-400 rpm | ||
| Spindle motor | 75 HP | ||
| Feed and Threads | |||
| Cross feed | 0.056-0.96 mm / rev(45 kinds) | ||
| Cross slide travel | 1250 mm (Full length) / 510mm (Half length) | ||
| Compound rest travel | X1: 250mm manual feeding / Z1: 400mm auto feeding | ||
| Tool size | 50 x 50 mm (2 x 2") | ||
| Longitudinal feeds | 0.13 - 1.92 mm / rev (48 kinds) | ||
| Lead screw | Ø 60 mm x 2 TPI (Inch) or Ø 60 mm x 12 mm (Metric) | ||
| Threading range, Metric | 2-30 mm / pitch (48 kinds) | ||
| Threading range, Inch | 1 -15 TPI (48 kinds) | ||
| Module pitch threads | 1-15 M (32 kinds) | ||
| DP. Pitch threads | 2-30 HP (45 kinds) | ||
| Tailstock | |||
| Quill Diameter | Ø 290 mm (11.4") heavy duty rotating quill | ||
| Center taper | MT7 | ||
| Quill travel | 300 mm (11.81") | ||
*The Specifications are subject to change without prior notice.
Dia. 290mm high rigidity rotation quill with A2-11 nose and MT7 inner taper movement by 2 speed reduction box and handwheel.
Tailstock body position movement by electric motor.
Heavy duty roller support bracket
Cross and longitudinal compound rest
TK2500N x 3000
Standard Accessories
- Inch/metric dual gear box
- 4-way toolpost with T slot
- Work light
- Coolant system
- Thread chasing dial
- 6-way rapid travel
- Main motor with inverter
- Hydraulic spindle disk brake
- Magnetic brake for main spindle
- Auto lubrication system
- Electric motor for tailstock body movement
- Tailstock rotating quill
- Sleeve & centers
- Leveling bolts & pads
Options
- Upgrade spindle bore
- Upgrade spindle motor
- Chuck or Face plate
- Adaptor for rear chuck
- Front chuck protection cover
- Rear chuck protection cover
- Boring bar tool holder (Full length cross slide only)
- Steady rest
- Follow rest
- Rear tool post
- Digital read out
- Heavy duty roller support bracket
- CE mark
機床商務網