機床商務網
詳細介紹
| Description | TNC-06N | TNC-08N |
| Capacity | ||
| Swing over bed | 400 mm | 400 mm |
| Swing over saddle | 160 mm | 200 mm |
| Distance between centers | - | 400 mm |
| Cutting diameter / length | Ø 130 / 160 mm | Ø 200 / 480 mm |
| Hydraulic chuck | 6" | 8" |
| Bar capacity | Ø 42 mm | Ø 52 mm |
| Bed width | 220 mm | 320 mm |
| Bed slant angle | 25° | 20° |
| Spindle | ||
| Spindle nose | A2-5 | A2-6 |
| Spindle hole | 55 mm | 60 mm |
| Spindle speed | 100-6000 rpm | 100-4000 rpm |
| Spindle motor | 7.5HP | 10HP |
| Spindle OD diameter | Ø 85 mm | Ø 100 mm |
| Turret (Option) | ||
| Turret type | Hydraulic | Hydraulic |
| Tool station | 8 | 8 |
| Tool holder size | Ø25 mm, Ø20 mm | Ø32 mm, Ø25 mm |
| Travel | ||
| X Travel | 230 mm | 320 mm |
| Z Travel | 300 mm | 560 mm |
| Rapid travel | 16 M/Min. | 12 M/Min. |
| Tailstock (Option) | ||
| Tailstock travel | - | 360 mm |
| Quill taper | - | MT4 |
| Tailstock diameter | - | Ø 53 mm |
| Quill travel | - | 100 mm |
*The Specifications are subject to change without prior notice.
Gang Tool System
Dimension (mm)
TNC-06N
TNC-08N
Turret Tool System
Work Range
TNC-08N (With tailstock)
TNC-06N
TNC-08N
Turret Tools Interference (mm)
TNC-06N (08N)
Standard Accessories (TNC-06N)
- 6" Hollow chuck & cylinder
- Toolpost & sleeve
- Auto lubrication, coolant & hydraulic system
- Sub-plate
- Work light
- Mitsubish E68 controller
Standard Accessories (TNC-08N)
- 8" Hollow chuck & cylinder
- Toolpost & sleeve
- Auto lubrication, coolant & hydraulic system
- Sub-plate
- Work light
- Mitsubish E68 controller
- Chip conveyor
Options (TNC-06N)
- Spindle orientation with index 15°
- Parts catcher
- Collet chuck
- Collets for collet chuck (each size)
- Auto door
- Chuck cleaner
- Soft jaw
- Bar feeder (Model: 65, Ø5-65mm, L:1.2M)
- Additional sub-plate
- Chip conveyor
- 8 Stations turret (Ø25mm,20mm)
- CE mark
- Fanuc 0i-Mate instead of Mitsubishi E-68
Options (TNC-08N)
- 10" Hollow chuck & cylinder
(Spindle bore 86mm, bar capacity Ø75mm) - Spindle orientation with index 15°
- Milling attachment
- Parts catcher
- Collet chuck
- Collet for collet chuck (each size)
- Auto door
- Chuck cleaner
- Soft jaw
- Bar feeder (Model: 65, Ø5-65mm, L:1.2M)
- Additional sub-plate
- 8 Stations turret (Ø 32mm ,25mm)
- Hydraulic tailstock
- Tool presetter
- CE mark
- Fanuc 0i-Mate instead of Mitsubishi E-68
TNC-06N/08N
機床商務網