機床商務網
詳細介紹
| 主要規格和技術參數 | ||
| AT520 | AT750 | |
| 床身上回轉直徑 | 300mm | 300mm |
| 兩距離 | 500mm | 750mm |
| 主軸通孔直徑 | 26mm | 26mm |
| 主軸轉速 | 160-1600r/min | 160-1600r/min |
| 主軸錐度 | NO.4 | NO.4 |
| 刀架移動行程 | 80mm | 80mm |
| 工作臺橫向行程 | 200mm | 200mm |
| 公制螺紋 | 0.5-3mm | 0.5-3mm |
| 英制螺紋 | 11-40 1/n"" | 11-40 1/n"" |
| 尾座錐度 | NO.3 | NO.3 |
| 尾座套筒行程 | 50mm | 50mm |
| 電機功率 | 0.55kw | 0.55kw |
| 鉆削范圍 | 20mm | 20mm |
| 盤銑范圍 | ||
| 立銑范圍 | ||
| 主軸轉速 | 315-2000r/min | 315-2000r/min |
| 主軸錐度 | NO.3 | NO.3 |
| 主軸行程 | 80mm | 80mm |
| 主軸端面至工作臺距離 | 240-320mm | 240-320mm |
| 工作臺尺寸 | 425*150 | 425*150 |
| 鉆銑頭垂直回轉 | 360 | 360 |
| 電機功率 | 0.37kw | 0.37kw |
| 凈重 | 230kg | 270kg |
| 外形尺寸 | 1100*550*740 | 1350*550*740 |
Features
◆ Compact, versatile combination machine.
◆ Adjustable height drill/mill head increases capacity.
◆ Large MT4 spindle bore.
◆ Fine feed handle and clutch for precision milling.
◆ Headstock provides two step of feeds.
◆ Spindle is supported by high precision bearing.
◆ Headstock is constantly oiled during operation.
◆ T-slot cross slide.
◆ Adjustable gibs for the slideway.
◆ Power longitudinal & cross feed.
◆ Gearbox gets left and right hａnd threads to cut.
◆ High precision chuck.
◆A combination switch
◆ Tailstock may be offset for turning taper.
Threading Dial & Half Nut
It can be realized power feed on longitudinal or crosswise.
cut and chase threads like a master machinist. you can cut right-ａnd left-hａnd threads in metric and inch.
Bi-directional power-feed
No stop to realized the functions of positive and negative on the lathe. leadscrew & crossfeed screw on both lathe and mill-yield finish of highest quality work
Two separate motors
This machine is multi-purpose machine tool of bench type, it is mainly used to lathe, drill and mill. which controlled by two motor.
Quick Changeover
Bigger mill clearance allows room for both lathe and mill setups without removing the lathe chuck.
◆ Compact, versatile combination machine.
◆ Adjustable height drill/mill head increases capacity.
◆ Large MT4 spindle bore.
◆ Fine feed handle and clutch for precision milling.
◆ Headstock provides two step of feeds.
◆ Spindle is supported by high precision bearing.
◆ Headstock is constantly oiled during operation.
◆ T-slot cross slide.
◆ Adjustable gibs for the slideway.
◆ Power longitudinal & cross feed.
◆ Gearbox gets left and right hａnd threads to cut.
◆ High precision chuck.
◆A combination switch
◆ Tailstock may be offset for turning taper.
Threading Dial & Half Nut
It can be realized power feed on longitudinal or crosswise.
cut and chase threads like a master machinist. you can cut right-ａnd left-hａnd threads in metric and inch.
Bi-directional power-feed
No stop to realized the functions of positive and negative on the lathe. leadscrew & crossfeed screw on both lathe and mill-yield finish of highest quality work
Two separate motors
This machine is multi-purpose machine tool of bench type, it is mainly used to lathe, drill and mill. which controlled by two motor.
Quick Changeover
Bigger mill clearance allows room for both lathe and mill setups without removing the lathe chuck.
機床商務網