機床商務網
詳細介紹
SB自動封頭切割機ZHC-1型轉盤式焊接劑襯墊 |
SB自動封頭切割機 | |
| 本機是加工容器封頭切割的設備、線速度可任意無級調速，斷面和坡口可一次加工完成，比立車加工工效提高幾倍。The local head of processing container cutting the best equipment line speedcan be stepless speed，Face and the break could be a processing completed，more than legislation to improve vehicle efficiency p rocessing times. | |
管子隔斷坡口機 | |
| 該機利用車削原理，對管子進行割斷、開坡口。刀具進給有手動與電動兩種，適用于Φ20-114mm管子的加工，大批量管子加工尤為適用。This machine is adopted with milling Principle to cut tubes and bevel them Thecutter feeding covers the manual feding and the motor-driven feeding.Themachine is suitable for processing the tubes(Φ20-114mm)，especially good formass processing tubes. | |
滾剪倒角機 | |
| 倒角機利用滾剪原理，對鋼板邊緣按所需角度進行剪切、以得到焊接所需的坡口、尺寸準確、表面光潔、一次成形，不需要清理毛刺，具有操作方便，工效高(每三分鐘3米)，能耗低等優點。The beveling machine is a dopted with the milling principle to mill the angle for the edge of the steel plate，ａnd to get the groove for welding. The machine is accurate in size，bright and smooth in surface，ａnd is formed once. There is no need to make de-burring. It’s convenient in operation ve ry high in working efficiency(three mete rs per minute)ａnd low in energy consumption. | |
ZHC-1型轉盤式焊接劑襯墊 | |
| 主要用于對圓筒進行內環縫焊接時，本機焊劑托盤緊貼住筒體外側環向焊接區，防止因裝配間隙或焊接規范變化引起漏渣，鐵水下淌及焊穿現象，使焊接達到比較理想的溶深度和光潔度。The gasket is used to stick closely to the outside-circumferential weldlng zone of the shell when the shell is performed inside-clrcumferential seam welding to prevent slag from leaking The iron fiuld from streaming down and prevent burning through due to the clearance by assembling or the change in welding specification so as to agin the ideal Penetration and b rightness and cleanness. | |
機床商務網