機床商務網
詳細介紹
產品參數/ Product parameter
所有的夾持系統，都有正確的解決方案
小工件需要小徑夾持方案，這就是新的模塊概念。新的小型三爪油壓夾頭模塊套件可以涵蓋約80%的零組件，如果是較大尺寸的工件，也可以輕松地的在2分鐘內更換為大型的三爪油壓模塊套件。
A CLAMPING SYSTEM FOR ALL CASES
Always the right solution
With the new jaw module in our HAINBUCH modular system, you are able to always use the right clamping devices. More than 80% of the workpieces are covered with the small jaw module and for large workpieces you can change-over within 2 minutes the larger jaw module.
JAW MODULE
Do you need a full through-bore? Do you want to implement workpiece clamping with the pull-back effect? If so, it's all possible! Because the basic unit into which the jaw module is inserted into, is a HAINBUCH chuck oder stationary chuck. If necessary, clamping headsormandrels may also be inderted. Therefore, you always have the right solution for your clamping situation.
Key advantages
?Jaw clamping with a HAINBUCH chuck or stationary chuck
??Enlarged clamping range of the basic clamping device
??Machining between the jaws is possible [milling or drilling]
?Can be used rotating [under RPM] and for stationary applications
??Deadlength clamping
?Available in two sizes – optimized interference contour
小工件需要小徑夾持方案，這就是新的模塊概念。新的小型三爪油壓夾頭模塊套件可以涵蓋約80%的零組件，如果是較大尺寸的工件，也可以輕松地的在2分鐘內更換為大型的三爪油壓模塊套件。
A CLAMPING SYSTEM FOR ALL CASES
Always the right solution
With the new jaw module in our HAINBUCH modular system, you are able to always use the right clamping devices. More than 80% of the workpieces are covered with the small jaw module and for large workpieces you can change-over within 2 minutes the larger jaw module.
JAW MODULE
Do you need a full through-bore? Do you want to implement workpiece clamping with the pull-back effect? If so, it's all possible! Because the basic unit into which the jaw module is inserted into, is a HAINBUCH chuck oder stationary chuck. If necessary, clamping headsormandrels may also be inderted. Therefore, you always have the right solution for your clamping situation.
Key advantages
?Jaw clamping with a HAINBUCH chuck or stationary chuck
??Enlarged clamping range of the basic clamping device
??Machining between the jaws is possible [milling or drilling]
?Can be used rotating [under RPM] and for stationary applications
??Deadlength clamping
?Available in two sizes – optimized interference contour
機床商務網