機床商務網
詳細介紹
CA系列臥式普通車床基本配置
導軌寬度400MM
主電機功率為7.5KW
主軸通孔52-80MM
加工精度可達IT7級
粗糙度可達3.2
導軌淬火深度達到4mm
24級轉速
公制、英制、模數、徑節螺紋
CA系列臥式普通車床可選配置
1、馬鞍機型
2、通孔直徑Ф80
3、通孔直徑Ф105
技術參數 | Specifications | CA6150 |
床身上大工件直徑 | Max.Swing over bed | 500mm |
刀架上大工件直徑 | Max.Swing over carriage | 300mm |
大工件長度 | Max.Length of work piece | 750mm-40000mm |
床身寬度 | Width of bed | 400mm |
刀桿截面 | Section of turning tool | 25×25mm |
主軸轉速范圍 | Spindle speeds | 10-1400rpm/16-1400rpm(24 steps) |
主軸內孔 | Hole through spindle | 52mm、（80mm）、[105mm] |
主軸孔錐度 | Spindle taper | 莫式NO.6(MT6)(Ф90 1∶20)[Ф113 1∶20] |
進給數量 | Number of feeds | 64種(kinds)(for each) |
公制螺紋 | Range of metric threads(kinds) | (1-192mm)44種(44 kinds) |
英制螺紋 | Range of inch threads(kinds) | (2-24tpi)21種(21 kinds) |
模數螺紋 | Range of module threads(kinds) | 0.25-48(模數39種)（Module 39 kinds） |
徑節螺紋 | Range of pitch threads(kinds) | 1-96DP(37種)(37kinds) |
尾座主軸大行程 | Max.Tail stock spindle travel | 150mm |
尾座主軸直徑 | Tail stock spindle diameter | 75mm |
尾座主軸孔錐度 | Taper of tail stock spindle center hole | 莫氏NO.5(MT5) |
主電機 | Main motor | 7.5KW(10HP) |
包裝尺寸 | Overall dimensions for750mm | 2550×1140×1750 |
Overall dimensions for1000mm | 2700×1140×1750 | |
Overall dimensions for1500mm | 3200×1140×1750 | |
Overall dimensions for2000mm | 3700×1140×1750 | |
Overall dimensions for2200mm | 4030×1140×1750 | |
Overall dimensions for3000mm | 4850×1140×1750 | |
Overall dimensions for4000mm | 5800×1140×1750 | |
重量 | Weight for 750mm | 2170 |
Weight for 1000mm | 2260 | |
Weight for 1500mm | 2420 | |
Weight for 2000mm | 2720 | |
Weight for 2200mm | 2940 | |
Weight for 3000mm | 3450 | |
Weight for 4000mm | 3750 |
機床商務網