W009深孔內圓磨床

用途及結構特點Purpose and Structure Characteristics
※MS-1型內圓磨床主要用于磨削深孔。
※磨孔直徑50~ 400mm,大廟削深度800mm。(經特殊訂貨磨孔直徑可增大至500mm.大磨削深度可至00m)
※床頭箱回轉角度士10° (可磨削錐孔)
※工作臺行程采用液壓無級調速。
※特殊訂貨.可滿足主軸錐孔的磨削。
※MS-1ype internal grinder mainly applies to deep hole grinding.
※Grinding diameter of 50-400mm, max. grinding depth of 800mm.
(via special order, the grinding diameter can be enlarged to 500mm, maximum depth of grinding up to 1000mm)
※Revolution angle of the spindle head is土10 ° (can grind taper hole)
※The work bench is hydraulic stepless speed regulation.
※Via special order,can grinding spindle cone holes.

W009深孔內圓磨床