機床商務網
詳細介紹
高強度鑄鐵
導軌高頻淬火
鑲貼優質耐磨片
自動集中潤滑
High quality casting body
Hardened and ground bed way coated with Turcite-B
Integrated automatic
lubrication system
C6150普通車床為通用機型，操作方便，布局緊湊，是理想的加工設備，主要針對一些盤類及軸類零部件加工，在選型的時候，軸類零部件應考慮刀架上zui大回轉直徑，而加工盤類零部件則反之應考慮卡盤上zui大回轉直徑，特別對于一些細長軸加工應考慮機床整體剛性及共震，安裝時應遠離震源，必要時配合中心架和跟刀架完成產品的加工。
◆床身導軌經超音頻淬火和精密磨削
◆主軸箱齒輪精密磨削，噪聲低
◆螺紋種類多
◆電器安全性能好，可靠性高
◆可帶電磁制動，床身顏色可供多種選擇
項目Items |
| C6150 | |
|
|
| |
中心高 | Center height | 250mm | |
床身上zui大工件直徑 | Max.Swing over bed | 500mm | |
刀架上zui大工件直徑 | Max.Swing over toolpost | 295mm | |
zui大工件長度 | Max.Length of workpiece | 750mm / 1000mm/1500mm/2000mm | |
床身寬度 | Width of bed | 360mm | |
主軸孔錐度 | Spindle taper | 莫氏6號MT6 | |
主軸通孔直徑 | Thru-hole of spindle | 52mm | |
轉速范圍 | Range of spindle speeds | 30-1600r/min(12steps) | |
橫刀架行程 | Cross toolpost travel | 240mm | |
小刀架行程 | Compound toolpost travel | 140mm | |
尾座*行程 | Tail stock center travel | 90mm | |
尾座套筒錐度 | Tail stock sleeve taper | MT4 | |
電機功率 | Spindle motor | 3/4KW | |
公制螺紋 | Range of metric threads(kinds) | 0.45-20mm(30種) | |
英制螺紋 | Range of inch threads(kinds) | 80-1.75n/1" | |
縱向進給量 | Longitudinal feed per spindle rev. | 0.039-1.1mm | |
橫向進給量 | Cross feed per spindle rev. | 0.018-0.55mm | |
外形尺寸 | Overall dimensions for 750mm | 2000×1130×1540 | |
| Overall dimensions for 1000mm | 2250×1130×1540 | |
凈重 | Net weight of 750mm |
| 1400kg |
|
|
| |
Net weight of 1000mm |
| 1500kg | |
項目Items |
| C6150 | |
|
|
| |
中心高 | Center height | 250mm | |
床身上zui大工件直徑 | Max.Swing over bed | 500mm | |
刀架上zui大工件直徑 | Max.Swing over toolpost | 295mm | |
zui大工件長度 | Max.Length of workpiece | 750mm / 1000mm/1500mm/2000mm | |
床身寬度 | Width of bed | 360mm | |
主軸孔錐度 | Spindle taper | 莫氏6號MT6 | |
主軸通孔直徑 | Thru-hole of spindle | 52mm | |
轉速范圍 | Range of spindle speeds | 30-1600r/min(12steps) | |
橫刀架行程 | Cross toolpost travel | 240mm | |
小刀架行程 | Compound toolpost travel | 140mm | |
尾座*行程 | Tail stock center travel | 90mm | |
尾座套筒錐度 | Tail stock sleeve taper | MT4 | |
電機功率 | Spindle motor | 3/4KW | |
公制螺紋 | Range of metric threads(kinds) | 0.45-20mm(30種) | |
英制螺紋 | Range of inch threads(kinds) | 80-1.75n/1" | |
縱向進給量 | Longitudinal feed per spindle rev. | 0.039-1.1mm | |
橫向進給量 | Cross feed per spindle rev. | 0.018-0.55mm | |
外形尺寸 | Overall dimensions for 750mm | 2000×1130×1540 | |
| Overall dimensions for 1000mm | 2250×1130×1540 | |
凈重 | Net weight of 750mm |
| 1400kg |
|
|
| |
Net weight of 1000mm |
| 1500kg | |
項目Items |
| C6150 | |
|
|
| |
中心高 | Center height | 250mm | |
床身上zui大工件直徑 | Max.Swing over bed | 500mm | |
刀架上zui大工件直徑 | Max.Swing over toolpost | 295mm | |
zui大工件長度 | Max.Length of workpiece | 750mm / 1000mm/1500mm/2000mm | |
床身寬度 | Width of bed | 360mm | |
主軸孔錐度 | Spindle taper | 莫氏6號MT6 | |
主軸通孔直徑 | Thru-hole of spindle | 52mm | |
轉速范圍 | Range of spindle speeds | 30-1600r/min(12steps) | |
橫刀架行程 | Cross toolpost travel | 240mm | |
小刀架行程 | Compound toolpost travel | 140mm | |
尾座*行程 | Tail stock center travel | 90mm | |
尾座套筒錐度 | Tail stock sleeve taper | MT4 | |
電機功率 | Spindle motor | 3/4KW | |
公制螺紋 | Range of metric threads(kinds) | 0.45-20mm(30種) | |
英制螺紋 | Range of inch threads(kinds) | 80-1.75n/1" | |
縱向進給量 | Longitudinal feed per spindle rev. | 0.039-1.1mm | |
橫向進給量 | Cross feed per spindle rev. | 0.018-0.55mm | |
外形尺寸 | Overall dimensions for 750mm | 2000×1130×1540 | |
| Overall dimensions for 1000mm | 2250×1130×1540 | |
凈重 | Net weight of 750mm |
| 1400kg |
|
|
| |
Net weight of 1000mm |
| 1500kg | |
項目Items |
| C6150 | |
|
|
| |
中心高 | Center height | 250mm | |
床身上zui大工件直徑 | Max.Swing over bed | 500mm | |
刀架上zui大工件直徑 | Max.Swing over toolpost | 295mm | |
zui大工件長度 | Max.Length of workpiece | 750mm / 1000mm/1500mm/2000mm | |
床身寬度 | Width of bed | 360mm | |
主軸孔錐度 | Spindle taper | 莫氏6號MT6 | |
主軸通孔直徑 | Thru-hole of spindle | 52mm | |
轉速范圍 | Range of spindle speeds | 30-1600r/min(12steps) | |
橫刀架行程 | Cross toolpost travel | 240mm | |
小刀架行程 | Compound toolpost travel | 140mm | |
尾座*行程 | Tail stock center travel | 90mm | |
尾座套筒錐度 | Tail stock sleeve taper | MT4 | |
電機功率 | Spindle motor | 3/4KW | |
公制螺紋 | Range of metric threads(kinds) | 0.45-20mm(30種) | |
英制螺紋 | Range of inch threads(kinds) | 80-1.75n/1" | |
縱向進給量 | Longitudinal feed per spindle rev. | 0.039-1.1mm | |
橫向進給量 | Cross feed per spindle rev. | 0.018-0.55mm | |
外形尺寸 | Overall dimensions for 750mm | 2000×1130×1540 | |
| Overall dimensions for 1000mm | 2250×1130×1540 | |
凈重 | Net weight of 750mm |
| 1400kg |
|
|
| |
Net weight of 1000mm |
| 1500kg | |
項目Items |
| C6150 | |
|
|
| |
中心高 | Center height | 250mm | |
床身上zui大工件直徑 | Max.Swing over bed | 500mm | |
刀架上zui大工件直徑 | Max.Swing over toolpost | 295mm | |
zui大工件長度 | Max.Length of workpiece | 750mm / 1000mm/1500mm/2000mm | |
床身寬度 | Width of bed | 360mm | |
主軸孔錐度 | Spindle taper | 莫氏6號MT6 | |
主軸通孔直徑 | Thru-hole of spindle | 52mm | |
轉速范圍 | Range of spindle speeds | 30-1600r/min(12steps) | |
橫刀架行程 | Cross toolpost travel | 240mm | |
小刀架行程 | Compound toolpost travel | 140mm | |
尾座*行程 | Tail stock center travel | 90mm | |
尾座套筒錐度 | Tail stock sleeve taper | MT4 | |
電機功率 | Spindle motor | 3/4KW | |
公制螺紋 | Range of metric threads(kinds) | 0.45-20mm(30種) | |
英制螺紋 | Range of inch threads(kinds) | 80-1.75n/1" | |
縱向進給量 | Longitudinal feed per spindle rev. | 0.039-1.1mm | |
橫向進給量 | Cross feed per spindle rev. | 0.018-0.55mm | |
外形尺寸 | Overall dimensions for 750mm | 2000×1130×1540 | |
| Overall dimensions for 1000mm | 2250×1130×1540 | |
凈重 | Net weight of 750mm |
| 1400kg |
|
|
| |
Net weight of 1000mm |
| 1500kg | |
項目Items |
| C6150 | |
|
|
| |
中心高 | Center height | 250mm | |
床身上zui大工件直徑 | Max.Swing over bed | 500mm | |
刀架上zui大工件直徑 | Max.Swing over toolpost | 295mm | |
zui大工件長度 | Max.Length of workpiece | 750mm / 1000mm/1500mm/2000mm | |
床身寬度 | Width of bed | 360mm | |
主軸孔錐度 | Spindle taper | 莫氏6號MT6 | |
主軸通孔直徑 | Thru-hole of spindle | 52mm | |
轉速范圍 | Range of spindle speeds | 30-1600r/min(12steps) | |
橫刀架行程 | Cross toolpost travel | 240mm | |
小刀架行程 | Compound toolpost travel | 140mm | |
尾座*行程 | Tail stock center travel | 90mm | |
尾座套筒錐度 | Tail stock sleeve taper | MT4 | |
電機功率 | Spindle motor | 3/4KW | |
公制螺紋 | Range of metric threads(kinds) | 0.45-20mm(30種) | |
英制螺紋 | Range of inch threads(kinds) | 80-1.75n/1" | |
縱向進給量 | Longitudinal feed per spindle rev. | 0.039-1.1mm | |
橫向進給量 | Cross feed per spindle rev. | 0.018-0.55mm | |
外形尺寸 | Overall dimensions for 750mm | 2000×1130×1540 | |
| Overall dimensions for 1000mm | 2250×1130×1540 | |
凈重 | Net weight of 750mm |
| 1400kg |
|
|
| |
Net weight of 1000mm |
| 1500kg | |
C6150普通車床是能對軸、盤、環等多種類型工件進行多種工序加工的臥式車床，常用于加工工件的內外回轉表面、端面和各種內外螺紋，采用相應的*和附件，還可進行鉆孔、擴孔、攻絲和滾花等。是車床中應用zui廣泛的一種，約占車床類總數的65%，因其主軸以水平方式放置故稱為臥式車床。
機床商務網