機床商務網
詳細介紹
| 機床型號 | Item | VMC714 |
| 工作臺尺寸mm | Pallet size | 1000*400 |
| 左右行程(X)mm | X axis travel | 600 |
| 前后行程(Y)mm | Y axis travel | 400 |
| 上下行程(Z)mm | Z axis travel | 500 |
| 主軸中心至立柱導軌距離mm | Distance from spindle center to column guide | 457 |
| 主軸端面至工作臺面距離mm | Distance from spindle nose to table | 110-610 |
| 工作臺T 型槽 | T-type tank | 3-14*110 |
| 主軸刀柄 | Type of taper hole | BT40 |
| 主軸轉速(rpm) | Max spindle speed | 8000 |
| 主軸馬達功率(Kw) | Spindle power | 3.7/5.5 |
| X.Y.Z軸伺服電機(Kw) | Three-axis servo power motor | 1.0/1.0/1.5 |
| X.Y.Z電機聯接方式 | Three-axis motor coupling | 直聯(Direct Torque motor) |
| X、Y、Z軸導軌方式 | Three-axis rail way | 滑軌(Slide-rail) |
| 工作臺zui大荷重(kg) | Max.weight on pallet | 500 |
| 換刀速度sec | Tool changing time(tool-to-tool) | 1.8 |
| 選刀方式 | Tool selection mode | 就近任選(The nearest) |
| 刀庫容量（把） | Tool storage capacity | 16（斗笠式）/(Carousel) |
| zui大*重量Kg | Max.tool weight | 8 |
| zui大*長度mm | Max.tool length | 250 |
| zui大*直徑mm | Max.Tool diameter | φ90 |
| XYZ快移速度m/min | Rapid traverse rate | 10/10/10 |
| 切削進給速度m/min | Cutting feed speed | 8 |
| XYZ定位精度mm | Positioning precision | ±0.008/±0.006/±0.006 |
| XYZ重復定位精度mm | Repeatability | ±0.004/±0.004/±0.004 |
| 機器外形 (L×W×H) | L*W*H | 2700×2250×2700 |
| 機床總重(t) | Weight | 3.5 |
機床商務網