本機采用鑄鋼或鋼板機身，全液壓傳動，水平調整，觸摸屏顯示快、慢速行程數據，自動潤滑裝置。工件在加工過程單機半自動或全自動連線，觸摸屏調整參數，具有半自動雙手安全按鈕控制和連線自動運行功能。

The machine adopts cast steel body, fullhydraulic transmission, horizontal adjustment, touch screen display fast andslow travel data, automatic lubrication device. In the process of workpieceprocessing, single machine semi-automatic or full-automatic connection, touchscreen to adjust parameters, with semi-automatic two hａnd safety button controlａnd automatic operation function of connection.

設備結構簡介

Structure Description

該設備為臥式結構（見結構示意圖），左側模芯部分固定，右側芯模在圓柱直線導軌導向下隨油缸左右往返運動。左右兩側通過上下拉板形成封閉結構，很大程度上增加了設備的剛性和精度。油缸以前法蘭形式固定于右側固定座，通過推動中間移動部件完成輪輞擴口功能。

The equipment has horizontal structure (like structure sketch). The left tooling is fixed, while the right one can be guided by cylindrical linear guide way to move to left or right side with oil cylinder. The left and right sides are formed in enclosed structure through upper and lower pulling plates, which much increase rigidity and accuracy. The oil cylinder is fixed on right fix seat in form of front flange and finishes rim flaring operation by the means of pushing middle movable part.

當工件在滾道連線中滾動到位后，右側模芯在油缸的推動下快速接近工件，到達工作位置時油缸改為工進速度，此時模芯自動定位中心且開始擴口工作，工進到位時接近開關或壓力傳感器發訊，油缸開始返程，接近開關檢測到達位置發出信號，油缸復位，完成一次加工循環任務。

When the workpiece in slide way rolls to the target place, right tooling will be driven by oil cylinder to quickly approach to workpiece. When it gets to the working position, oil cylinder will change to feeding speed, tooling will automatically locate to central and start flaring. When feeding in the place, the proximity switch or pressure sensor will transmit signal, oil cylinder will start return, proximity switch will transmit signal when it detects that get to the target place, oil cylinder will back to home position. A processing circle mission is finished.

本機由主機、液壓傳動裝置和電器控制裝置三個部分組成，主機包括：機身、擴口模具；液壓傳動裝置包括油箱、油泵—電機組、集成閥等；電氣裝置包括電氣控制操縱箱等。主機和液壓傳動裝置安裝在混凝土基礎上，由膨脹螺栓固定，電氣箱固定在機身后側。

This equipment consists of three parts: host machine, hydraulic driving device and electrical control device. The host machine includes lathe bed, flaring tooling; hydraulic driving device includes oil tank, oil pump-motor group, pile-up valve, etc.; electrical device includes electrical control cabinet, etc. The host machine and hydraulic driving device is installed on concrete foundation, fixed by expansion bolts. The electrical cabinet is fixed on the back side of lathe bed.