LB-6500(塔式)轉塔式24刀加工中心產品介紹INTRODUCTION

1.適用各種鋁合金型材，鋼結構件、工業型材安裝孔、流水槽、鎖孔、形孔、端銑及攻絲等加工工序;

2.可實現型材.上任意位置的鉆、銑、攻牙加工。-次裝夾即可完成同- -加工面上全部孔槽加工，具有*的工作效率; .

3.工作頭采用大功率矢量全閉環高速電主軸，在重型切削負荷下能精確控制速度和峰值性能，高質量完成各種鉆、銑

削及攻絲加工;

4.帶有24工位刀具庫，自動換刀;

5.采用冷卻噴水系統，可對刀具進行冷卻處理。( 可選配循環式噴水電泵) ;

6.手輪操縱簡單靈活精度準確;移動式操作臺，方便對刀;

7.刀庫不會出現轉角偏差，影響傳感器跟蹤;

8.切屑水及廢料收集，可回收切屑，及切屑液;

9.全封板鈑金，加工過程安全可靠，有效防止鋁屑及切屑液飛出;

10.配置紅外感應安全光柵，有效保護操作人員安全。

1.It is suitable for various Aluminum Alloy profiles, steel structures, industrial profiles insallation holes, launder, lock,hole, miling and

tapping.

2.It can realize any position on the profile of dilling, milling, tapping processing. Once the clamping can be completed on the same

processing surface all the hole groove processing, with high work efficiency.

3.The only head of high power high speed spindle vector loop, which can accurately control the speed and peak performance in heavy

load cutting, complete all kinds of dilling and milling and tapping of high quality.

4.This station with 24 tools, automatic tool change.

5.Adopt the cooling water system, the cooling process of the tool. (optional circulation type water spray electric pump)

6.This simple and flexible hand wheel control precision;  operating platform, convenient tool.

7.This knife does not appear deviation angle, impact sensor tracking.

8.When cutting water and waste collection, Recyclable chip, and chip solution.

9.After the full sealing plate sheet metal processing, safe and reliable, effectively prevent the aluminum chips and chip liquid fly out.

10.After the configuration of infrared induction safety grating, effectively protect the safety of operating personnel

LB-6500(塔式)轉塔式24刀加工中心參數圖：