機床商務網
詳細介紹
1.錐柄部（BT/SK/CAT/HSK等）精度：＜AT3
2.基本材質:20CrMnTi
3.熱處理硬度:HRC56°±2°滲碳層＞0.8mm
4.真圓度＜0.8μm,表面粗糙度Ra＜0.5μm
5.精密動平衡G2.5 20000-30000RPM(需定制）
6.刀柄可分為三種形式：A型（中心不出水）、AD型（僅中心出水）、
AD+B型（中心+法蘭出水)
7.刀柄本體精度：*≤0.005mm，A*≤0.003mm
__________________________________________________________________________
SDC產品特點:
端小前徑化設計,降低干涉的情形
Slim design avoids interference
無螺帽的后拉式夾頭設計,剛性強穩定性高
Collet chuck designed without nut and with inner-holding collet,
This has strong rigdity and high stability
__________________________________________________________________________
產品規格：
訂貨編號 | L | L1 | L2 | θ | D | d（夾持范圍） | |
BT30 | SDC06-60 | 108.4 | 60 | 38 | 6° | 14 | 3～6 |
SDC06-90 | 138.4 | 90 | 68 | ||||
SDC08-60 | 108.4 | 60 | 38 | 22 | 3～8 | ||
SDC08-90 | 138.4 | 90 | 68 | ||||
SDC12-80 | 128.4 | 80 | 58 | / | 34 | 3～12 | |
BT40 | SDC06-100 | 165.4 | 100 | 73 | 6° | 14 | 3～6 |
SDC06-150 | 215.4 | 150 | 123 | ||||
SDC08-100 | 165.4 | 100 | 73 | 22 | 3～8 | ||
SDC08-150 | 215.4 | 150 | 123 | ||||
SDC12-100 | 165.4 | 100 | 73 | / | 34 | 3～12 | |
SDC12-150 | 215.4 | 150 | 123 | ||||
BT50 | SDC06-100 | 201.8 | 100 | 62 | 6° | 14 | 3～6 |
SDC06-150 | 251.8 | 150 | 112 | ||||
SDC08-100 | 201.8 | 100 | 62 | 22 | 3～8 | ||
SDC08-150 | 251.8 | 150 | 112 | ||||
SDC12-100 | 201.8 | 100 | 62 | / | 34 | 3～12 | |
SDC12-150 | 251.8 | 150 | 112 | ||||
機床商務網